ELECFREAKS Pico:ed V2 is a development board based on Raspberry Pi RP2040 MCU. It uses a dual-core Arm Cortex-M0+ processor with 264KB RAM. The front of the board contains two buttons and a 7x17 dot matrix screen, which can be conveniently used for classroom teaching.
1. RP2040: Designed by Raspberry Pi, RP2040 features a dual-core Arm Cortex-M0+ processor with 264kB internal RAM and support for up to 16MB of off-chip flash.
2. USB & Battery Connector
3. Power status LED and USB data transfer LED.
4. 7*17 Dot-matrix Screen
5. Bootsel & Reset Button.
6. 25-pin notched edge connector.
7. Onboard Buzzer.
8. Compatible With Most micro:bit Accessories
9. Exquisite design
10. 2 x Programmable Buttons
11. You can use MicroBlocks for graphical programming.
What makes us different from others.
ELECFREAKS Pico:ed V2 は、Raspberry Pi RP2040 MCU に基づく開発ボードです。 264KB RAM を搭載したデュアルコア Arm Cortex-M0+ プロセッサを使用しています。ボードの前面には、2 つのボタンと 7x17 のドット マトリックス画面があり、教室での授業に便利に使用できます。
1. RP2040: Raspberry Pi によって設計された RP2040 は、264kB の内部 RAM を備えたデュアルコア Arm Cortex-M0+ プロセッサを搭載し、最大 16MB のオフチップ フラッシュをサポートします。
2. USB & バッテリーコネクタ
3. 電源ステータス LED と USB データ転送 LED。
4. 7*17ドットマトリックススクリーン
5. Bootsel & リセットボタン。
6. 25 ピン ノッチ エッジ コネクタ。
7. オンボード ブザー。
8.ほとんどのmicro:bitアクセサリと互換性があります
9.絶妙なデザイン
10. 2 x プログラム可能なボタン
私たちを他の人と違うものにするのは何ですか。
アイテム | パラメータ |
Mcu | RP2040 |
SRAM | 264KB |
閃光 | 2MB |
プログラマブル IO | 19個 |
オンボード デバイス | ブザー、LED、7x17 LED マトリックス、2 * ボタン |
プログラム言語 | マイクロパイソン、C++ |
サイズ | 約52mm×42mm |
正味重量 | 10g |
アイテム | 量 |
ELECFREAKS Pico:ed V2 ボード | 1 |